mysite
Dostupnost vyzvednutí nebylo možné načíst
The Disposable Color mask comprises three layers, two non-woven, and the white melt is a blown filter inside. The inner layer is thinner than the outer layer to be more comfortable against the face. Its results in uneven coloring (mottling/streaking) where the white shows through the coating. It is not a chemical residue and does not affect the mask's quality, functionality, or safety.
| Resistance to penetration by synthetic blood, measured in mm Hg | 160mm Hg |
| Differential pressure, mm H20/cm2 (Breathability) | <6.0 |
| Bacterial filtration efficiency | >98% |
| Sub-micron particulates filtration efficient at 0.1 micron | >98% |
| Flame spread | Class 1 |
Put your mask
1. Clean your hands with soap and water sanitizer before touching the mask
2. Hold the mask by the ear loops. Place a loop around each ear
3. Adjust the mask to cover the mouth and nose fully.
4. Form the nose wire around the nose and cheek to close any gasp.
Remove your mask
1. Grasp the mask by the earloops only and remove the mask. Do not touch the front or inside of the mask
2. Pull the mask away and deposit it in a waste container.
3. Wash your hands or use sanitizer.
